71Chapter 4 TroubleshootingSystem AnalysisKeypad LED OK?Lamp On?Step:1. Check Lamp Door2. Check Connection between Power BD and Main BD3. Check Power Board and Interlock4. Check Main BoardNOYESStep:1. Check Lampen wire , Lamp wire and Ballast wire2. Check C/W and wire connection3. Check Main board4. Check Lamp5. Check BallastNONo Signal?Step:1. Check Input Cable2. Check OSD Source set up3. Check Main boardYESYESPower Auto Turn Off?Step:1. Check OSD Lamp Hours2. Check Lamp Door3. Check Lamp still light or not?4. Check Fan still spin or not?5. Check Thermal statusYESNOIR Remote Control NG?Step:1. Check Remote module battery2. Check Remote module3. Check IR wire between Main board and IR board4. Check IR Reciver on IR boardYESPixel Fail?Step:1. Check the connection betweenMain BD and Chip BD2. Check the connection betweenOP engine and DMD Chip3. Check Chip board4. Check Main boardYESNONO