Acer Veriton 5500 Service Manual

Also see for Veriton 3500: User guide User guide User guide User guide Service guide

Contents

Acer Veriton 5500 Service Manual Manual pdf 96 page image

Chapter 3 88Removing the AGP VGA Card1. See “Removing the Housing Cover” on page 862. Remove the screw on the bracket of the AGP card. Set the screw aside, you will need it when insertingthe AGP card.3. Gently pull out the AGP card to remove it from the AGP slot.NOTE: There is no AGP slot for Veriton 5500.NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGPdevices.Removing the Modem Card1. See “Removing the Housing Cover” on page 862. Remove the one screw as shown below and then remove the modem card from the PCI slot.NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI orAGP.Removing the USB/ Audio Board Module1. See “Removing the Housing Cover” on page 862. See “Removing the Modem Card” on page 883. Disconnect the USB cable and the memory stick cable from the main board.4. Remove the two screws as shown here and then detach the USB/ Audio board