|
43EnglishFollow the instruction on screen to complete the process.Restore from backupUsers can restore backup previously created (as stated in the Createbackup section) from hard drive, CD, or DVD.1 Boot to Windows® XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery window, select Recovery actions andclick Next.5 Select the desired restore action and follow the onscreeninstructions to complete the restore process.Note: The "Restore C:" item is enabled only if there is a userbackup stored on the hard drive (D:\). Please refer to the Createbackup section.Create factory default image CDWhen the System CD and Recovery CD are not available, you can createthem by using this feature.1 Boot to Windows® XP.2 Press + to open the Acer eRecovery utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery window, select Recovery settings andclick Next.5 In the Recovery settings window, select Burn image to disk andclick Next.6 In the Burn image to disk window, select 01. Factory default imageand click Next.7 Follow the instructions on screen to complete the process.
PreviousNext |