CG437K User Guide English7Power savingThe monitor will be driven into "Power Saving" mode by the control signal from thedisplay controller, as indicated by the blue-color power LED.State LED LightON Blue (Static, Breathing, Off) by LED Control SettingPower Saving Mode Blue (Static or Breathing) by LED Control SettingThe power saving states will be kept until a control signal has been detected or thekeyboard or mouse is activated. The recovery time from Active OFF state back to ONstate is around 3 seconds.----------------------------------------------------------------------------------------------------------Note:LED Control:Standby Mode: Control the effect of the LED under normal display (Default is Mode B).Mode A Fixed LED brightness is 50%.Mode BBreathing effect, the brightness range is 0% ~ 50%.(Brightness from 0% to 50% takes 3 seconds)(Brightness from 50% to 0% takes 3 seconds)Mode - StandardPictureColorAudioOSDEnterMoveSystemGaming100%LED BrightnessOffScreen On ModeMode BStandby ModeLED ControlXBack