Acer Predator CG437K User Manual

Also see for Predator CG437K: User guide

Acer Predator CG437K User Manual Manual pdf 13 page image

CG437K User Guide English3Connecting the cablesTo install the monitor on your host system, please follow the steps below:1. Turn off your computer and unplug your computer's power cord.2. Connect the signal cable to the HDMI (optional) and /or DP (optional) input socket ofthe monitor, and the HDMI (optional) and /or DP (optional) output socket of the graphicscard on the computer.3. USB Type-C Cable (Optional, USB Type-C input models only) Connect one end of theUSB Type-C cable (optional) to your computer and connect the other end to your electricdevices.(power supplier 5V>/3A, 9V>/3A, 15V>/2A, 20V>/1.5A)4. Connect the USB Cable(Optional)Connect the USB cable to port for fast charge.(power supplier BC1.2 >/1.5A)Connect the USB cable to port.5. Optional: Connect one end of the LED Module cable to your computer and connect theother end to the LED lamp belt.6. Insert the monitor power cable into the power port at the back of the monitor.7. Plug the power cords of your computer and your monitor into a nearby electrical outlet.USBDPUSB Type C-----------------------------------------------------------------------------------------------------------Note:• Audio output is only for audio output model. Please check user manual formore instruction.• About the LED lamp belt connection:When you want to connect the LED lamp belt, remove the silicone pad first.When you do not need to connect the LED lamp belt, be sure to install the siliconepad back.