Acer MG 3001-P User's GuideConnecting the power cord1. Locate the AC input port on the rear of the device and insert the power cord jack.2. Insert the connector end of the power cord into the AC adapter.3. Insert the power cord plug into the power source.Setting up the remote control1. Open the cover on the back of the remote unit.2. Insert two AAA batteries (supplied) by the matching the + and – on the batteriesto the diagram inside the battery compartment.Taking care of your remote controlFollow these steps to ensure proper care of your remote control:• Handle the remote control with care. Dropping it, placing it in direct sunlight,or allowing it to get wet may cause damage.• Do not tamper with the batteries, and keep them away from children.• When you anticipate that the remote control will not be used for an extendedperiod, remove the batteries to prevent possible damage from batteryleakage.• Dispose of used batteries according to local regulations. Recycle if possible.17
