Altos G330 Installation Configuration Guide 507. Follow the instructions to the Installation Settings8. At the Installation settings, select the Software.9. Check C/C++ Compiler and Tools under Development to add C/C++compiler tools.10. Click on Details, change Filter from Patterns to Package Groups.11. Select Source under Development in the left window and check kernel-source in the right window to add kernel-source.12. After you add the kernel-source and C/C++ Compiler and Tools, pleaseclick on Accept and follow the instruction to complete the installation.Gigabit Ethernet Driver InstallationThe SUSE Linux Enterprise Linux 10 could detect the onboard Intel 82573Eautomatically. We still recommend replacing the driver with the one inEasyBUILD 7.1 build 600 (or later).1. Remove the module e1000# rmmod e10002. Make the driver diskette for EasyBUILD 7.1 build 600 (or later).3. Copy driver from floppy to hard disk# mount /media/floppy# cp –R /media/floppy/. /tmp/4. Change the directory to the driver source and install the driver# cd /tmp/src/# make install# insmod e1000.koOnboard SATA RAID Utility Setup1. Copy the utility Spy.i386.rpm from the EasyBUILD build 600 (or later) toHDD. Please refer to the Software Required section to find the utility inthe EasyBUILD.2. Install the Spy.i386.rpm# rpm –ivh Spy.i386.rpmSUSE Linux Enterprise Server 10 EM64T Installation (withAdaptec SAS 44300 HostRAID)Below information describes how to manually install SUSE Linux EnterpriseServer 10 EM64T on Altos G330 with add-on Adaptec SAS 44300 HostRAID.
