41 Altos G330 Installation Configuration GuideDrivers RequiredFor SUSE Linux Enterprise Server 10 Installation, the following device drivers arerequired. These drivers can be found in EasyBUILD 7.1 build 600 (or later)Device Version Directory on EasyBUILDOnboard ATIES1000N/A OS built-inOnboard Intel 3000ChipsetN/A No DriverOnboard LSI SATARAID5.09c \Disk\G330\raid\LSI\sles10Onboard Intel82573E GigabitEthernet7.3.15-NAPI \Disk\G330\NIC\Intel\pro1000.lxOnboard USB 2.0 N/A OS built-inSoftware RequiredThe management utility of onboard LSI SATA RAID can be found in theEasyBUILD 7.1 build 600(or later).Software Version Directory on EasyBUILDOnboard SATARAID MonitorUtility1.11.0 \APP\G330\SATARAID\Monitor\linux\Configuring onboard LSI SATA RAIDPlease refer to the Appendix B. for the onboard LSI SATA RAID configuration.Installation Tips1. Since SUSE Linux Enterprise Server 10 cannot recognize the onboard LSISATA RAID, you need to make a driver diskette from the EasyBUILD7.1build 600 (or later) first before the installation.2. Boot the system form SUSE Linux Enterprise Server 10 bootable CD.3. When you see the boot menu on the screen, press F5 and select Yes.4. Press Enter to continue the installation.5. Insert the driver disk to the floppy, select fd0: Floppy and OK to load theonboard LSI SATA RAID driver from the driver diskette.6. After loading the driver, select OK and Back to return the installation.7. Follow the instructions to the Installation Settings8. At the Installation settings, select the Software.9. Check C/C++ Compiler and Tools under Development to add C/C++compiler tools.10. Click on Details, change Filter from Patterns to Package Groups.
