Acer Extensa 4120 Service Manual

Also see for Extensa 4120: User guide

Contents

Acer Extensa 4120 Service Manual Manual pdf 78 page image

68 Chapter 4Check the Battery PackCheck the battery pack via the OS control and by checking the actual battery pack.Using the OS control:1. Open the Power Management setting in the Windows Control Panel screen.2. On the Power Meter tab, confirm that the Current Power Source and Total Battery Power Remainingparameters are correct.3. Repeat steps 1 and 2 using both the battery pack and the AC adapter as the power source.This will help you identify if the problem is on recharging or discharging.Checking the battery pack voltage:1. Power off the computer.2. Remove the battery pack and measure the voltage between battery terminals 1 (+) and 6 (ground).3. If the voltage is still less than 7.5 Vdc after recharging, replace the battery.Checking the battery charge function:1. Use a discharged battery pack or a battery pack that has less than 50% of the total power remaining wheninstalled in the computer.2. If the battery charge indicator does not light up, remove the battery pack and allow it to return to roomtemperature, then reinstall the battery pack.3. If the charge indicator still does not light up, replace the battery pack.Touchpad CheckIf the touchpad doesn’t work, do the following actions one at a time to correct the problem. Do not replace anon-defective FRU:1. Reconnect the touchpad cable.2. Replace the touchpad board.3. Replace the system board.After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movementcan occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardwareproblem. No service actions are necessary if the pointer movement stops in a short period of time.