|
64English 5 In the Recovery settings window, select Reinstall applications/drivers andclick Next.6 Select the desired driver/application and follow the instructions on screento re-install.At first launch, Acer eRecovery Management prepares all the needed softwareand may take few seconds to bring up the software content window.Change passwordAcer eRecovery Management and Acer disk-to-disk recovery are protected by apassword that can be changed by the user. Follow the steps below to changethe password in Acer eRecovery Management.1 Boot to Windows XP.2 Press + to open the Acer eRecovery Management utility.3 Enter the password to proceed. The default password is six zeros.4 In the Acer eRecovery Management window, select Recovery settings andclick Next.5 In the Recovery settings window, select Password: Change Acer eRecoveryManagement password and click Next.6 Follow the instructions on screen to complete the process.Note: If the system crashes, and will not boot to Windows, you canrun Acer disk-to-disk recovery to restore the factory default imageunder DOS mode.
|
