55ProtectThis function gives the image protection from erasing. Follow the steps below toperform the protect functions.1. Set the mode dial to [ ] and power on the camera.2. Press the MENU button.The menu screen appears.3. Select the Protect by using the c or d buttonand press the SET button.4. Protect submenu appears, including Single, All andSelect. Use the c or d button to select one ofthem and press the SET button to confirm.5. Use the c or d‚ button to select the desired setting and press the SET button.In Single/All submenu, use the c or d button to select the desired setting andpress the SET button.[Set]: The one image displayed on the LCD monitor is locked and[ ] is displayed on the LCD monitor.[Cancel Protect]:Cancel image protection.[Exit]: Exit from the menu screen.If “Select” is selected, thumbnail display appears on the LCD monitor. Usethe c,d, e or f button to select the image and press the [ ] button toselect lock/unlock and press the SET button to confirm.
