23Using the LCD Monitor1. Turn the camera on by pressing the POWERbutton.2. Set the mode dial to [ ].By default, the LCD monitor setting is "ON".3. Compose the picture in the LCD monitor.4. Press the shutter button down halfway (thecamera adjusts the exposure and the focus), thenpress it down fully.The viewfinder LED indicator lights red while the camera is processing acaptured image.Note:In still image capture mode, AF LED is activated at Auto and Macro modewhen the LV value is under 6.LCD Monitor Display (Capture Mode)The [ ] Display button can select display format. Whether in “Still Image” or “Movie”mode, preview image with full OSD is displayed.OSD (on-screen-display) full display OSD display OFF LCD monitor OFFNote:The image in the LCD monitor darkens in strong sunlight or bright light. Thisis not a malfunction.Using the LCD monitor for an extended period of time will decrease the numberof images you can take. To increase the shots and conserve battery power,it is recommended to turn the LCD monitor off and use the viewfinder instead.
