iiiSpecial notes on LCD monitorsThe following are normal with the LCD monitor and do not indicate a problem.• Due to the nature of the fluorescent light, the screen may flicker duringinitial use. Turn off the power switch and then turn it on again to makesure the flicker disappears.• You may find slightly uneven brightness on the screen depending on thedesktop pattern you use.• The LCD screen has 99.99% or more effective pixels. It may includeblemishes of 0.01% or less such as a missing pixel or a pixel lit all the time.• Due to the nature of the LCD screen, an afterimage of the previous screenmay remain after switching the image, when the same image is displayedfor hours. In this case, the screen is recovered slowly by changing the imageor turning off the power switch for a few hours.Information for your safety andcomfortSafety instructionsRead these instructions carefully. Keep this document for future reference.Follow all warnings and instructions marked on the product.Cleaning your monitorPlease carefully follow these guidelines when cleaning the monitor:• Always unplug the monitor before cleaning.• Use a soft cloth to wipe the screen and cabinet front and sides.Connecting/disconnecting the deviceObserve the following guidelines when connecting and disconnecting powerfrom the LCD monitor:• Make sure the monitor is attached to its base before connecting the powercord to the AC power outlet.• Make sure both the LCD monitor and the computer are turned off beforeconnecting any cable or unplugging the power cord.• If the system has multiple sources of power, disconnect power from thesystem by unplugging all power cords from the power supplies.