Acer B276HUL User Manual

Contents

Acer B276HUL User Manual Manual pdf 26 page image

EN-17Adjusting the setting1 Press the MENU key to bring up the OSD.2 Using the / keys, select Setting from the OSD. Then navigate tothe feature you wish to adjust.3 The Setting menu can be used to adjust the screen Menu Language andother important settings.4 Select Power-off USB charge ON/OFF to enable/disable Power-off USBcharge function.5. Select PIP to adjust picture‐in‐picture settings. The PIP signalsource needs to be selected manually. The table below shows the activeinput combinations for PIP.PIP On & Input statusPIPMainDVI HDMI1 HDMI2 DPDVI x x x vHDMI1 x x x vHDMI2 x x x vDP v v v xx: Does not support PIP function in this combinationDP mode selectionThe default out of DP signal setting in the B276HUL is DP1.2. User canfollow the setting message to confirm selection of DP1.2 or DP1.167 When using PIP, "Wide mode", "6-axis Saturate", "6-axis Hue", "ACM"and "Detect Video" will be enabled for the main source display."Wide mode" is not supported when using PBP function.8

/ 28

Related manuals for Acer B276HUL