3-38 User’s Guide3.7.4 Non-PnP ISA Device ConfigurationThis parameter reserves the use of resource addresses for non-PnPISA devices.Whenever a parameter is set to "Yes", that address is reserved for anISA card only. The system will not allocate this address to any PCI orPnP cards.When set to “No”, the system will allocate these resource addressesto PCI or PnP cards.When installing a non-PnP ISA device, youhave to determine which resource address touse. Refer to your manual for technicalinformation about the PCI card.This section consists of four pages:
