1-6 User’s GuideJumpers are prefixed “JP”. Connectors areprefixed “CN”. The blackened pin of ajumper or connector represents pin 1.1.4.2 Jumper SettingsTable 1-1 lists the system board jumpers with their correspondingsettings and functions.Table 1-1 System Board Jumper SettingsJumper Setting FunctionPower SupplyJP1 1-2*2-3420 W200 WBIOS TypeJP2 1-22-3*BrandedGenericPassword SecurityJP3 1-22-3*Check passwordBypass password5V Standby SourceJP4 1-2*2-3For SPS with 5V standbyFor SPS without 5V standbySCSI Channel 1High-Byte TerminationJP6 1-2*2-3Terminator always set to ONSCSI terminator set to ON or OFFby softwareVGA FeatureJP7 1-2*2-3Enabled/disabled through BIOSOnboard VGA always disabled* Default setting
