Acer AL707 User Manual

Also see for AL707: Service manual

Contents

41L1700-786-1B 英文 4INSTALLATION INSTRUCTIONSSWIVEL BASE IVEL BASEInstall RemoveFigure 1 Installing and Removing the Swivel BasePOWERCORDPower Source:1. Make sure that the power cord is the correct type required in your area.2. This LCD monitor has an External universal power supply that allowsoperation in either 100/120V AC or 220/240V AC voltage area (No useradjustment is required.)3. Connect the AC-power cord into your LCD monitor’s External Adapterinput socket, and then plug the other end of External adapter to LCDmonitor’s DC-power-input. The AC-power cord may be connected to eithera wall power outlet or the power outlet socket on your PC, depending onthe type of power cord supplied with your LCD monitor.NOTESA certified power supply cord has to be used with this equipment. The relevantnational installation and/or equipment regulations shall be considered. Acertified power supply cord not lighter than ordinary polyvinyl chloride flexiblecord according to IEC 60227 (designation H05VV-F 3G 0.75mm 2 orH05VVH2-F2 3G 0.75mm 2 ) shall be used. Alternative a flexible cord be ofsynthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm 2 )shall be used.