41L1700-786-1B 英文 10ADJUSTING THE PICTUREThe descriptions for function control LEDS1. Contrast Adjust the picture contrast.2. Brightness Adjust the picture brightness.3. Focus Adjust picture Focus.4. Clock Adjust picture Clock.5. H. Position Adjust the horizontal position of the picture.6. V. Position Adjust the vertical position of the picture.7. Auto Center Used to center the picture automatically.8. Language Multi-Language selection.9. Dos-mode selected Dos-mode resolution selection for 720x400@70Hz and 640x400 @70Hz10. Red Adjusts Red intensity.11. Green Adjusts Green intensity.12. Blue Adjusts Blue intensity.13. C1 (Warm) Color Set the color temperature to warm white.14. C2 (Cool) Color Set the color temperature to cool white.15. Reset Clear each old status of Auto-configurationand re-do auto-configuration.16. Exit Save user adjustment and OSD disappear.Notice: for “Dos-mode selected” function ,after selected the icon pressMENU to confirm the selection , press or to change to 720x400 or640x400 , press MENU again to confirm and then press POWER button offthen on for activate the setup (for general, most of the Dos mode was set in720x400@70Hz).