Windows Peer-to-Peer71This command will redirect print jobs from the parallel port to the Print Serverport.Using only port 1 with the SMB protocol is stronglyrecommended.2. Return to Windows and double-click the Printer icon in the Control Panel.3. Select the printer driver for the printer attached to the Print Server from the list ofInstalled Printers (or click Add>> to install a new driver).4. Click "Set As Default Printer".5. Click "Connect…" to open the Connect dialog box.6. Click "Network…7. From the Device Name list, select the local port (LPT1 - LPT3) which youredirected to the Print Server in step 1.8. In the Path field, select the print server that was entered in step 1. For example,select \\SC123456\P1.9. Check the Reconnect at Startup box, then click OK to close the ConnectNetwork Printer dialog box.10. Click "OK" to close the Connect dialog box and "Close" to close the PrinterDialog.Configuration is now complete. You will be able to print to the printer attached tothe Print Server by selecting the printer you just installed.PrintingOnce configured, printing to the printers attached to the Print Server is the same asprinting with the printer attached directly to your local LPT port. Simply selectFileËPrint. When the Print screen appears, select the appropriate printer andoptions and click OK.
