CERTIFICATION: cULus WET NO. 20290LEDDLPIMPORTANT SAFETY INSTRUCTIONSMESURES DE SECURITE A RESPECTUREBefore assembling your ACCESS LIGHTING fixture, please make sure thatyou carefully read through this instruction sheet. Save this instruction sheetand refer to it when additions to or changes in the fixtureconfiguration are made.Lisez attentivement ce manuel d’instructions. Enregistrer cette feuilled'instructions et de s'y référer lorsque les ajouts ou changements dansla configuration de montage sont faites.CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCHCIRCUIT CONDUCTOR.CONSULTER UN ELECTRICIEN QUALIFIE POUR VOUS ASSURER QUE LESCONDUCTEURS DE LA DERIVATION SONT ADEQUATSTHIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLEINSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONTSTRUCTIONAND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D’INSTALLATION PERTINENT, COLLECTION APPLICATION MODEL NO.PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENTAINSI QUE LES RISQUES INHERENTSNOTE: The important safeguards and instructions that appear in thismanual are not meant to cover all possible conditions and situations thatmay occur. It must be understood that common sense, caution and care,are factors that can’t be built into any product. These factors must besupplied by the person(s) caring for and operating the fixture.Read all instructionsDo not install this fixture in hazardous locations.N'installez pas cet appareil dans des emplacements dangereux.Do not install any fixture assembly closer than 6 inches from anycurtain or similar combustible material.Laisser une distance d’au moins 6 pouces entre ce luminaire et la toutesurface combustible."WARNING Risk of Fire and Electric Shock."“CAUTION: Risque d’ Incendie et de Choc Electriques.”WHAT WE PROVIDE• Crossbar• Mounting Hardware• Canopy with Socket• 1 x Glass Shade anddecorative guard• 1 x A19 E-26 LEDbulbWHAT YOU NEED• Screwdriver• Wire Cutters• Wiring Supplies as Specifiedby Electrical CodeGENERAL INFORMATIONAll electrical connections must be in accordance with all ordinances,Local and the U.S. National Electrical Codes (NEC). These fixtures areintended for mounting to a standard 4” metal octagon outlet box.The box must be directly supported by the building structure and U.L.Recognized.STEP BY STEP INSTRUCTIONSBefore starting your installation disconnect the Power by turning off theCircuit Breaker or by removing the fuse at the fuse box. Just turning thelight off at the light switch is not sufficient to prevent electrical shock.1NAUTICUS Wall or Ceiling 20290LEDDLP