Menu
Accent 1000 Hardware Manual
Also see for 1000: Hardware manual
                                     | |
Contents
| 
Setting Up Infrared (IR) for Remote ControlsIR capability is enabled automatically with the Accent. The IR area of your device is on the backof the case on each side of the headphone jack, near the top. When you are facing the front ofthe device, the IR Learning Receiver is on the top left and the IR Transmitter is on the top rightof the IR area.You can teach infrared signals for almost any appliance you own that has a remote control. Ifyou want to teach a remote control signal to your device, point your remote control at the IRarea.If you want to send an IR signal from your device, make sure the IR area is facing in the generaldirection of the appliance you want to send the signal to.Use the IR Setup Menu in the NuVoice Toolbox to teach remote signals to your Accent. Thefollowing IR functions can be performed in NuVoice by using IR Setup Menu in the Toolbox:• Add, modify, delete, or rename a device/appliance• Add, change, delete, and test IR functionsAdding a DeviceSeveral devices are already set up in the Accent. You only need to teach the signals to yourdevice. To add additional devices, select Add a Device and follow the instructions on the display.Modifying a Device1. Use the Up/Down arrows to select the appropriate device. When the appropriate device isfound, tap the button for the desired function and follow the instructions on the display.2. Select Modify Selected Device.3. Select the function to be changed and follow the instructions on the display.4. When instructed, point the appliance’s remote control at the top of the Accent and pressthe appropriate function button on the remote (e.g., power). When teaching the device a new signal or re-learning a signal, make sure the remote ispointed directly at the IR Learning Receiver on the left side of the headphone jack.5. The Accent will beep when it receives the signal.6. Select Test Signal to confirm that the signal functions properly. The Re-Learn All Signals option allows each signal for an appliance to be re-learnedwithout re-entering the menu each time.Accent 1000 Hardware Manual 20 |
Related manuals for Accent 1000
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved