41AEC-7763LC/LD & ARS-2022/2022D5.12 Adv SetupOn the above figure press ESC to return to Function 11. Then, press ESC for 2seconds to enter Function 12-01 as the following figure shows.Function 12 Adv Setup lets you change the system configuration. This functionincludes 12 parts. They are UnderRun Protect, Overburn, Read Error Skip, FormatHDD, Verify HDD, Burn-in, Update Firmware, Compare Firmware, H/W Diagnostic,Load Default, CD+G, and ISRC.5.12.1 UnderRun ProtectOn the above figure if you press ESC, you can enter Function 12 as the followingfigure shows.When erasing finishes, LCD will show the results as follows.Full EraseOK:01 Fail:0012-01. Adv SetupUnderRun Protect12. Adv Setup