Menu
Academy of Model Aeronautics Fokker Eindecker E.III ARF Instructions For Final Assembly
                                    | |
Contents
| 
25For more cool Wattage products visit our website at http://watt-age.globalhobby.comStep 2: Installing the Cowlq Test fit the cowl into place. To align it properly, the cowlshould be centered over the fuselage and there should be abouta 1/4" space between the front of the cowl and the propeller.q When satisfied with the alignment, remove the cowl.q Carefully peel away the protective layer from the piece of double-sided tape preinstalled inside the cowl.q Set the cowl back into place and realign it. Press firmly around the top of the cowl to secure it to the fuselage.q Kwik Bond Thick C/Aq # 1 Phillips Head Screwdriverq Excel Modeling Knifeq Electric DrillYOU'LL NEED THE FOLLOWING PARTS:q {1} Cockpit Deckq {1} Plywood Cockpit Mounting Blockq {1} Pilot FigureSECTION 11: INSTALLING THE COCKPIT DECKq {1} Machine Gunq {1} 3mm x 16mm Flange-Head Wood ScrewYOU'LL NEED THE FOLLOWING SUPPLIES:q 1/16" Drill Bitq Ernst Airplane Standq Rulerq Masking TapStep 1: Installing the Pilot Figureq Remove the protective layer from the double-sided tapeon the bottom of the pilot figure.q Carefully stick the pilot to the cockpit deck. Support thebottom of the deck with your fingers and firmly push thepilot down to secure it into place. |
Related manuals for Academy of Model Aeronautics Fokker Eindecker E.III ARF
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved