Abus TVIP52501 User Manual

Abus TVIP52501 User Manual Manual pdf 12 page image

70English4.1 First camera accessThe first camera access takes place by using the program „Installation Wizard 2“.After starting the wizard it will automatically search the network for all connected EyeseoIP network camerasand video servers.You can find the program on the on the CD at CD-ROM\Tools\EyseoIP Tools\Install the program on your PC and start it. The wizard will automatically search your network for EyseoIPcamera.The IP address at factory default is 169.254.0.99. Without using the installation wizard you can only connectto the camera if the IP address of the PC is between 169.254.0.1 and 169.254.0.98.If a DHCP server is active in your network the IP address for your PC and camera will be set automatically.Start now the installation wizard. If no DHCP server is active the installation wizard adds a virtual IP addressin the range of 169.254.0.xx. As long as the installation wizard is active you can access the network cameraby using the virtual IP address. We recommend adjusting immediately the cameras network settings to the IPsettings of the PC’s network.After closing Installation wizard 2 the additional virtual IP adress will be removed. If IP-Camera’s IP address is still in a different IP area then the one from your PC the camera accessis no longer possible.4.2 Connecting to the camera by using a web browserIf connecting to the camera by using Mozilla Firefox or Netscape a QuickTime stream will be displayed. Thisrequires that QuickTime from Apple is installedIn order to show the video stream when using Microsoft Inter Explorer a video plug-in is required. This will beinstalled when connecting to the camera. A window will appear asking you to install the plug-in. Press theinstall button to continue an install the plug-in. Depending on the security setup of the Internet Explorer theinstallation might be blocked. In this case you need to adjust the security settings.