Abus TVIP52501 User Manual

Abus TVIP52501 User Manual Manual pdf 10 page image

68English3.3 Video output and DIP switchesAnalogue video output (NTSC/PAL):Connect the RCA connector from the video/audio cable with an analogue video input from amonitor. (e.g.: TVAC10100)To set the correct video norm (PAL/NTSC) please use the DIP switch on the back panel ofthe camera.External / Internal microphone (Ext. /Int.)Use this DIP switch to change between integrated microphone and external audio input.3.4 Gate input / output and status displayStatus LED description:In order to reboot the camera or restore the factory settings press the reset button. Use an appropriate smalltool.Camera reboot: Press the reset button once and wait until the camera to restart.Restore factory settings: Press and hold the reset button for approx. 30 seconds until the status LEDs startflashing. All settings will be reset to factory default.Status / LED colour Green RedSystem start Off OnCamera turned off Off OffNetwork works (heartbeat) 1/s OnNetwork problem Off OnFirmware update 1/s 0.1/sRestoring factory settings 0.1/s 0.1/s