Ableconn PEX-SA1 series User Manual

Contents

windows driver installation

Ableconn PEX-SA1 series User Manual Manual pdf 1 page image

2-I115-01F- 1 -SATA III - 6Gbps Low Profile PCIe 2.0 Host Adapter1. Introduction2Ports 6Gbps SATA III PCI Express 2.0 host board to support, Hardware RAID0,RAID1, NCQ & Port Multiplier!1.1. Featureso 6Gbps SATA III 2 Ports PCIe Gen2 1 Lane Host Adaptero Hardware RAID controller to offload host CPU for max performanceo Supports PCIe 1.0 and PCIe 2.0 motherboardo Compliant with 5Gbps PCI Express 2.0o Fully compliant with Serial ATA specifications 3.0 transfer rate of 6Gbpso Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-RayDriveo Supports Non-Raid mode for Optical Drive and Blu-Ray Driveo Supports Non-Raid, Hardware RAID0, Hardware RAID1 for HDD and SSDo Supports ATA and ATAPI commandso Supports Native Command Queuing (NCQ)o Supports one SATA FIS-based or Command-based switching Port Multipliero Low Profile PCIe Form Factoro Regular size PCIe bracket on board and Low Profile bracket includedo SATA Hot-plug capabilityo Two Pin headers on board for LED connectiono OS Built-in AHCI inbox driver natively in Windows 10, Win8, Win7, Vista, 2008,2012, Linux, Mac 10.x and later, no additional driver requiredo BIOS on board support OS Booting & RAID Configuration on Windows andLinuxo Provides Windows XP drivero Provides Windows & Mac & Linux GUI to configure and Monitor HardwareRAID0, RAID1 and support max two RAID groups2. RAID Configuration via BIOS Utility1. Power up the computer system.2. During the Power-on-Self Test (POST), press “CTRL-M” to launch BIOSUtility.3. Check the screen with “Topology” pane at the left hand side and“Information” pane at the right hand side.4. Select proper option for RAID Creating, RAID Erasing, RAID1 Rebuildingand Virtual Disk Deleting5. Please find MSU_user_guide_xxx.pdf in driver CD pathE:\SATA6G_M9128 \GUI\Windows for the detail of BIOS Utility

/ 2

Related manuals for Ableconn PEX-SA1 series