BIOS SetupAW9D-MAX, AW9D 3-15 CPU FeatureClick key to enter its submenu:Phoenix – AwardBIOS CMOS Setup UtilityCPU FeatureThermal Management Thermal Monitor 1 Item HelpX - TM2 Bus Ratio 12 Xx - TM2 Bus VID 0.8375VLimit CPUID MaxVal DisabledC1E Function EnabledExecute Disable Bit EnabledEIST Function Enabled↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5: Previous Values F6: Fail-Safe Defaults F7: Optimized DefaultsThermal ManagementThis item selects the type of thermal monitoring.- TM2 Bus RatioThis item represents the frequency (bus ratio) of the throttled performance state that will beinitiated when the on-die sensor goes from not hot to hot.- TM2 Bus VIDThis item represents the voltage of the throttled performance state that will be initiated whenthe on-die sensor goes from not hot to hot.Limit CPUID MaxValWhen set to [Enabled], this item limits the CPUID maximum value to 3, which is usuallyrequired for older OS like Windows NT4.0.Leave this item at its default [Disabled] settings for OS like Windows XP.C1E FunctionThis item appears only for certain processors with the C1E (Enhanced Halt State) Function.When set to [Enabled], the processor will further reduce the total power consumption.
