Aastra Venture IP Options Manual

Also see for VentureIP 480i: Release notes Administrator's guide Specifications Release note Administrator's guide

Aastra Venture IP Options Manual Manual pdf 3 page image

Venture IP Web Administration System Options GuidePAGE 1 8/4/2006© 2006 Avaya Inc.All Rights Reserved.IntroductionThis guide provides instructions for using a web browser to administer all VentureIP 480i telephonesoperating on the same network. While administering the VentureIP telephone system does not requirethe technical expertise of a traditional “system administrator” or IT professional, it is recommended thatone person controls the advanced feature settings contained in this guide.Installation and ConfigurationA typical Venture IP system configuration is as follows:480480480480A typical configuration consists of a standard IP Router or Switch (not included), Cat5 cabling to eachphone, and a Venture IP Gateway for access to standard analog phone lines provided by a PublicNetwork Service Provider. No Central Server is required. All the features are in the Phone.System hookup is easy with the Venture IP System. Simply plug each phone and the Venture IPGateway into an unused port of a Fast Ethernet 100Mbps Router or Switch, connect the Venture IPGateway (provided separately) to the analog phone lines provided by your service provider, applypower, and the system auto configures itself. Note that the example above assumes a Router or Switchequipped with POE (Power Over Ethernet) to supply power to the Venture IP Gateway and phones.Mid-span POE injectors are also an option and can be ordered separately from Aastra.