Operational, Basic, and Advanced Parameters41-001160-03 Rev 00, Release 2.5 A-175DND Key Mode SettingsExampleThe following is an example of configuring the mode for DND in theconfiguration files:dnd key mode: 2softkey1 type: dndsoftkey1 states: idle connected incoming outgoing busyIn the above example, softkey 1 is configured for DND for line 1 only, with a“custom” configuration. Pressing softkey 1 displays DND screens for which youcan customize on the phone.Parameter –dnd key modeAastra Web UI: Basic Settings->Preferences->GeneralConfiguration Files aastra.cfg, .cfgDescription Sets the mode for how the phone uses “do not disturb” (DND):• account Sets DND for a specific account.DND key toggles the account in focus on theIP Phone UI, to ON or OFF.• phone Sets DND ON for all accounts on the phone.DND key toggles all accounts on the phone to ON orOFF.• custom Sets the phone to display custom screens afterpressing the DND key, that list the account(s)on the phone. The user can select a specificaccount for DND, turn DND ON for all accounts,or turn DND OFF for all accounts.Notes:1. If there is only one account configured on the phone, then the modesetting is ignored and the phone behaves as if the mode was set to“Phone”.2. You must configure a DND key on the phone to use this feature. Toconfigure a DND key, see “Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters” on page A-216.Format IntegerDefault Value 1 (phone)Range 0 (account)1 (phone)2 (custom)Example dnd key mode: 2
