Softkey/Programmable Key/Feature Key/Expansion Module Key ParametersA-256 41-001160-04 Rev 02, Release 2.5IP Phone Administrator GuideEnabling/Disabling Ability to Add/Edit Speeddial KeysBLF List URI SettingsParameter –speeddial editConfiguration Files aastra.cfg, .cfgDescription Allows you to enable or disable the ability to add a speeddial key or edita speeddial key.The default is enabled (Yes) allowing you to create and edit speeddialkeys on the phone using the Press-and-hold feature, softkeys,programmable keys, expansion module keys and key pad, speeddialmenu in the IP Phone UI, and the SAVE TO key.If this parameter is set to disabled (No), it blocks the user from usingany of the features on the phone to create or edit a speeddial key.Format BooleanDefault Value 1 (Enabled)Range 0 (Disabled)1 (Enabled)Example speeddial edit: 0Parameter–list uriBLF List URI(in Web UI)Aastra Web UI Operation->Softkeys and XML->ServicesOperation->Programmable Keys->ServicesOperation->Expansion Module Keys->ServicesConfiguration Files aastra.cfg, .cfgDescription Specifies the URI that the phone uses to access the BLF list on the Broadsoftserver when the BLF list key is pressed. When you specify a URI for thisparameter, the phone uses the Internet to access the BLF list on theBroadsoft server.Format HTTP server path or Fully Qualified Domain NameDefault Value Not ApplicableRange Not ApplicableExample list uri: my6757i-blf-list@as.broadworks.com
