Model 9133i SIP Admin Guide 69133i IP Phone Configuration9133i IP PhoneConfigurationThe Network and SIP optionswithin the 9133i IP Phone can beconfigured from the phone or fromthe Aastra 9133i Web Client webinterface. Administrator leveloptions are password protected inboth the phone and the webinterface.NetworkDHCP automatically sends the IPaddress, Subnet Mask and Gatewaynetwork (also DNS and FTP Server)information to the 9133i IP Phoneduring initialization when the 9133iis first powered up or restarted. Bydefault, the DHCP setting isenabled. The network settingscannot be changed when DHCP isused, so DHCP must be set to “Off”in order to manually change thesesettings.Turn DHCP On or OffFrom the 9133i IP Phone:1. Press the I button to enterthe Options list.2. Select 8.Network.3. Enter the administrator’spassword. The default passwordis 22222.4. Press V to select Enter.5. Select 1. DHCP.6. Press V select Change andindicate whether DHCP shouldbe used.From the Web Client:1. Click on the Network sub-categoryunder the ADMIN main category.2. Enter the administrator’s username and password (the defaultuser name is admin and passwordis 22222).3. In the web page that has justopened, check the Use DHCPcheck box to use DHCP anduncheck to indicate that you donot want to use DHCP.4. Click on the Set Values button tosave the changes that you justmade.Manually ConfigureNetwork SettingsIf you are not using DHCP, youneed to configure the networksettings for the phone manually.From the 9133i IP Phone:1. Press the I button to enterthe Options List.2. Select option 8. Network.3. Enter the administrator’spassword. The default passwordis 22222.4. Select option 2. IP Address tochange the IP address.5. Select option 3. Subnet Mask tochange the subnet mask.6. Select option 4. Gateway tochange the gateway address.7. Select option 5. Primary DNS tochange the Primary DNS.8. Select option 6. Secondary DNS tochange the Secondary DNS.When an IP address has beenassigned to the 9133i, you have theoption to either continueconfiguring the 9133i IP Phonethrough the I button on the9133i or to start using the Aastra9133i Web Client. See “The Aastra9133i Web Client” on page 5 fordetails.From the Web Client:1. Click on the Network sub-category under the ADMIN maincategory.