Line Keys and Softkeys41-001452-05 REV02 – 07.2014 75Sprecode KeyYou can set a key to automatically activate specific services offered by the server by setting a key to "sprecode". For exam-ple, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically activates a service provided bythe server. The value you enter for this field is dependent on the services provided by the server. Contact your SystemAdministrator for information about available services.Configuring a Sprecode KeyUse the following procedure to configure a Sprecode key on the 6737i IP Phone. The procedure shows the softkey screenas an example.Aastra Web UI1. Click on Operation->Softkeys and XML.orClick on Operation->Expansion Module .Softkeys2. Select from “Key 1” through “Key 10” on the Top keys.orSelect from "Key 1" through "Key 20" on the Bottom keys.3. In the "Type" field, select Sprecode.4. In the "Label" field, enter a label to display on the IP phone for this key.5. In the "Value" field, enter the appropriate value for accessing specific services from the server.Note:For values to enter in this field, contact your System Administrator.6. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the "Connected" state for this softkey.Expansion Module Keys7. Select from “Key 1” through “Key 36” (M670i)orSelect from “Key 1” through “Key 60” (M675i)8. In the "Type" field, select Sprecode.
