Model 6730i IP Phone User Guide 115Handling CallsIf any party in a conference hangs up (including the party that began the conference), all otherparties in the conference are still connected.Joining Additional Parties to Active ConferencesIn centralized conferencing, you can join multiple incoming or outgoing calls to activeconferences. Before following this procedure, at least one active conference must exist on yourphone.1. As Party 1, pickup the handset or press the speakerphone key.A line opens up.2. Call Party 2 by dialing their number (or answer an incoming call of a Party).3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before addingthem to the conference.4. Press the Conf Key .5. Press the Line Key that has the active conference. (For example, Line 1 and Line 2 both haveactive conferences. Pressing Line 1 joins Party 1 and Party 2 to the conference on Line 1.Pressing Line 2 joins Party 1 and Party 2 to the conference on Line 2.)6. Press the Conf Key again to join the Parties to the active conference.Ending a Conference and Transferring Remaining PartiesThe 6730i allows a Host to drop from a 3-way conference and let the other two parties remainconnected by pressing a Xfer key.If you are the Host of a conference and want to leave that conference:• While in a 3-way conference press the Xfer key on the phone.Your phone leaves the 3-way conference but the remaining parties are still connected to theconference.Ending CallsTo end a call, you first need to connect or reconnect to the call if not already connected (for example, ifyour caller is on hold). Press or the line/call appearance button of the active call to end thecall. If connected through the handset, you can also place the handset back on hook to end the call.Notes:1. The 6730i does not support scrolling between lines.2. The Caller ID of the dropped Host still displays on the remaining parties’ phones.IP Phone UI
