Preliminary RemarksThe device conforms to the following requirements: European Directive93/42 EEC for Medical Products Act; Medical Products Act; European Standardsfor Electrical Medical Equipment EN 60601-1 (General Safety Provisions),EN 60601-1-2 and EN 55011 (Electromagnetic Compatibility); EuropeanStandards pertaining to Non Invasive Blood Pressure InstrumentsEN 1060-1(General Requirements), EN 1060-3 (Supplementary Requirements forElectromechanical Blood Pressure Measuring Systems).The above is evidenced by the CE mark of conformity accompanied by thereference number of a designated authority.This device is designed for adults only.Environment for useThe device is for use in patient's home.Precaution1. Precision components were used in theconstruction of this device. Extremes intemperature, humidity, direct sunlight, shockor dust should be avoided.2. Clean the device with a dry, soft cloth.Never use thinner, alcohol, benzene, or wetdusters.3. Avoid tightly folding the cuff or storing thehose tightly twisted for long periods, as suchtreatment may shorten the life of thecomponents.4. The device and cuff are not water resistant.Prevent rain, sweat and water from wettingthe device and cuff.5. Measurements may be impaired if thedevice is used close to televisions,microwave ovens, cellular telephone, X-rayor other devices with strong electrical fields.2