A&D UA-767PC Instruction Manual

Also see for UA-767PC: Instruction manual Instruction manual

Contents

A&D UA-767PC Instruction Manual Manual pdf 10 page image

10Data in MemoryStoring Data in MemoryThis device stores up to 126 sets of measurement data in memory automatically.If an error message appears, the measurement data will not be stored.Whether the data will be stored or not after the measurement can be selected asfollows:• When the START button is pressed or the automatic power OFF functionworks after a measurement, the measurement data will be stored inmemory.• When the clock button is pressed after a measurement, the measurementdata will not be stored in memory.Recalling Memory DataTo access measurements stored in memory, wait until the monitor is in standbymode. Then, press and hold the START button until the display shows the mostrecent measurement.The display will show all of the stored measurements starting with the most recentand then will return to standby mode.To interrupt memory display, press the START button to initiate inflation mode. Toput the monitor in standby mode, press the START button again.Erasing Data in MemoryTo erase measurements stored in memory, wait until the monitor is in standbymode. Then, press and hold the clock button until the buzzer sounds and thememory access indicator blinks. All data in memory will be erased.