A&D UA-1020 Instruction Manual

Also see for UA-1020: Specification Instruction manual Instruction manual Instruction manual

Contents

A&D UA-1020 Instruction Manual Manual pdf 14 page image

English 13STARTNotes for Accurate MeasurementSit down in a comfortable position. Place your arm on a table with yourpalm facing upward and the cuff at the same level as your heart.Relax for about five to ten minutes before taking a measurement. If youare excited or depressed by emotional stress, the measurement willreflect this stress as a higher (or lower) than normal blood pressurereading and the pulse reading will usually be faster than normal.An individual's blood pressure varies constantly, depending on what youare doing and what you have eaten. What you drink can have a verystrong and rapid effect on your blood pressure.This device bases its measurements on the heartbeat. If you have a veryweak or irregular heartbeat, the device may have difficulty determiningyour blood pressure.Should the device detect a condition that is abnormal, it will stop themeasurement and display an error symbol. Refer to page 6 for thedescription of symbols.This blood pressure monitor is intended for use by adults only. Consultwith your physician before using this device on a child. A child should notuse this device unattended.TriCheck MeasurementThe TriCheck mode takes three consecutive measurements automaticallyand displays the average values of the three measurements.Selecting the TriCheck Mode1. In the pressure setting mode, pressthe SET button to enter the TriChecksetting mode. The current settingblinks.2. Press the or button to turn theTriCheck mode ON or OFF.ON: TriCheck modeOFF: Normal measurement mode (default value)3. Press the START or SET button toturn the device off. After threeminutes of non-operation, the devicewill turn off automatically.pressorThe current setting blinksChange the settingIn the pressure setting mode,or