BM series 8115.6. Storing or Changing the PasswordThe password can be changed in "Password (loc no..)" of the function table.1 In the weighing mode, press and hold the RANGE key (forapprox. 2 seconds) until ba5fnc is displayed, and thenrelease the key.2 Press the RANGE key several times to display loc no. .3 Press the PRINT key to display the login level (ADMIN).4 Press the RANGE key to display the login level to bechanged (ADMIN/U5ER 01 to 10).The stabilization indicator appears at a login level wherea password has been stored. (The password can bechanged.)5 To change the password, press the PRINT key. For details,refer to “15.7. Changing the Password”.NotesTo log out, press the ON:OFF key to turn the display off.With the function pA55 2 set, the administrator password is required tolog in as an administrator. No password needs to be stored for U5ER 01 to 10.When the balance software version is 1.50 to 1.64, only one passwordcan be stored. While the balance displays loc no. , press the PRINT keyto display the current password.Press and hold(approx. 2 seconds)Press several timesLogin levelPressseveraltimesRefer to “15.7. Changingthe Password”.bA5Fn0.0000RANGERANGELoc no.AdMIN.RANGEU5 ER01U5 ER10RANGE
