BM series 8518.2. Options And Peripheral EquipmentEthernet Interface BM-08The interface to connect the balance to a LAN.Accessory: The "WinCT-Plus" data communication software.The software can acquire data frommultiple balances connected to a LAN.The software can control these balanceswith commands.The software can acquire data transmittedfrom balances.Example: When pressing the PRINT keyof the balance, data is output and isacquired by the computer.The stored data can be used withMicrosoft EXCEL (if installed).Pipette Accuracy Tester BM-014This option can be used to inspect the volumedispensed from the pipette.Accessory evaporation trap is used to preventthe evaporation of the test liquid inside it.The WinCT-Pipette software converts the testliquid mass into a volumetric value.Electrode Unit of the DC Static Eliminator AX-BM-NEEDLESET (4 pieces)Use these electrode units for replacement parts of theDC static eliminator built into the balance.Replace all four units with new ones at the same time.Refer to "6.5. Built-in DC Static Eliminator" for thereplacement.Display Cover AX-BM-031 (5 pieces)This option is the same as the accessory display cover.Test Tube Holder AX-BM-032This option is the same as the accessory test tube holder.5 , 30Sample cup
