BM series 6715. Password FunctionThe password function can be specified for an authorized user by using a password stored in thebalance by manager. While the password function is used, the balance can not be weighedwithout inputting the correct password.Password: Four digits (4 x 4 x 4 x 4 = 256 outcomes) using MODE , RANGE , PRINT andRE-ZERO keys.At factory setting, the password function is not used.The management of the password function is performed in "Password function" of"10.2. Details Of The Function Table".15.1. Using Password FunctionThe password function can be switched between "Use" or "Not used" at "Password function(locfnc)" of "10.2. Details Of The Function Table".1 Press and hold the RANGE key in the weighing mode.ba5fnc is displayed.2 Press the RANGE key several times until locfnc isdisplayed.3 Press the PRINT key to display pa55 "o"f"f .To cancel the operation, press the CAL key.4 Press the RE-ZERO key to display pa55 "o"n .5 Press the PRINT key to display 5ure :ye5 " " where "No" isselected.6 "YES" and "No" can be switched with the RE-ZERO key.Press the RE-ZERO key to display 5ure :"y"e"5 where"YES" is selected.7 Press the PRINT key to store the new setting. The passwordfunction can now be used.When turning on the balance, the password input is displayed.Press and holdPress several timesYES/No switchYes is selectedNo is selected
