Video Driver ControlsAttaching Other Displays C - 5BAttaching Other DisplaysIf you prefer to use a monitor or flat panel display, connect it to the external monitorport or HDMI-Out port on the left of the computer.To Clone Displays:1. Attach your external display to the appropriate port, and turn it on.2. Go to the Intel(R) G&M control panel and click Display > Multiple Displays.3. Click Operating Mode and select Clone Displays from the menu.4. Click Apply, and OK to confirm the settings change.5. You can switch the Primary/Secondary Display from the menu.Multiple DisplayAt least one other dis-play must be attached inorder to view MultipleDisplay selection op-tions.General SettingsClick General Settingsto access settings theoptions for any attacheddisplay.Figure C - 3Display > MultipleDisplays (Clone)
