AGA eR7 Series Installation Manual

Also see for eR7 100-3: User's guide & installation instructions User's guide & installation instructions

Contents

AGA eR7 Series Installation Manual Manual pdf 1 page image

Installation GuideAGA eR7Model No’s: eR7 100-3 and eR7 150-5For use in GB and IECAUTION: THIS UNIT IS HEAVY, PROPER EQUIPMENT AND ADEQUATE MANPOWER MUST BE USED IN MOVING THERANGE TO AVOID DAMAGE TO THE UNIT OR THE FLOOR.REMEMBER, when replacing a part on this appliance, use only spare parts that you can be assured conform to the safety andperformance specification that we require.DO NOT use reconditioned or copy parts that have not been clearly authorised by AGA.PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCEAND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.DO NOT store or use gasoline or other flammable vapors and liquids in thevicinity of this or any other appliance.Installation and service must be performed by a qualified installer or serviceagency.WARNING! This appliance must be installed with an appropriate device thatwill allow permanent disconnection of the Live and Neutral conductors. DuringInstallation or disconnection prior to any electrical work, the appliance must bepermanently disconnected from the Supply (Live) and Neutral Conductors.WARNING!Please read the Warning, Cautionary notes at the start of this section.If the information contained within these instructions is not followed,property damage or personal injury may occur.LPRT 51776309/19 EINS 517779