AEG SKD71800F0 User Manual

Also see for SKD71800F0: User manual User manual

AEG SKD71800F0 User Manual Manual pdf 16 page image

Replacing the lampThe appliance is equipped with a longlife LED interior light.Only service is allowed to replace the lighting device. Contact your Service CenterClosing the door1. Clean the door gaskets.2. If necessary, adjust the door. Refer to "Installation".3. If necessary, replace the defective door gaskets. Contact the Service Center.TECHNICAL DATADimension of the recessHeight 1780 mmWidth 560 mmDepth 550 mmThe technical information are situated in the rating plate on the internal left side of theappliance and in the energy label.INSTALLATIONPositioningWARNING!If you are discarding an old appliance that has a lock or catch on the door, you mustensure that it is made unusable to prevent young children being trapped inside.The appliance shall have the plug accessible after installation.Install this appliance at a location where the ambient temperature corresponds to theclimate class indicated on the rating plate of the appliance:Climate class Ambient temperatureSN +10°C to + 32°CN +16°C to + 32°CST +16°C to + 38°CT +16°C to + 43°CElectrical connectionBefore plugging in, ensure that the voltage and frequency shown on the rating plate cor-respond to your domestic power supply.16 Technical data