AEG S70370KA3 User Manual

Contents

AEG S70370KA3 User Manual Manual pdf 17 page image

Removing the shelf holdersYour appliance is equipped with shelf retainersthat make it possible to secure the shelves duringtransportation.To remove them proceed as follows:1. Move the shelf holders in the direction of thearrow (A).2. Raise the shelf from the rear and push it for-ward until it is freed (B).3. Remove the retainers (C).Fitting the door handlesThe handles are supplied as a kit at delivery.1. Screw the top handle bracket to the han-dle rod.2. Fit the bottom handle bracket on the low-er right-hand side of the door.3. Fit the top handle bracket on the topright-hand side of the door.4. Screw the handle rod to the bottom han-dle bracket.Do not use excessive force and overtighten thescrews (max. 2 Nm) as you may damage thedoor handles.LevellingWhen placing the appliance ensure that it standslevel. If necessary adjust the feet using the ad-justment spanner supplied.Door alignment is dependent on proper levelling.ABC1 23 4Installation 17

/ 20

Related manuals for AEG S70370KA3