Do not pull, move or damage any pipes and/or cables inside the cabinet.Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishesto clean the interior as this will damage the surface and leave a strong odour.Clean the condenser (black grill) and the compressor at the back of the appliance with abrush or a vacuum cleaner. This operation will improve the performance of the applianceand save energy consumption.Take care of not to damage the cooling system.When moving the cabinet, lift it by the front edge to avoid scratching the floor.Many proprietary kitchen surface cleaners contain chemicals that can attack/damage theplastics used in this appliance. For this reason use a soft cloth rinsed in warm water andneutral soap emulsion for cleaning external surfaces.Do not use detergents or abrasive paste as these will damage the paint, or stainless steelanti finger print coating.After cleaning, reconnect the equipment to the mains supply.Cleaning the ventilation grilleThe ventilation grille can be removed for washing.Make sure the door is open and then:1. Loosen the upper edge of the grille bypulling outward/downward.2. Pull the grille straight out to completelyremove it.3. Vacuum clean under the cabinet.Care and cleaning 11