PositioningInstall this appliance at a location where the ambient temperature corresponds to theclimate class indicated on the rating plate of the appliance:Climate class Ambient temperatureSN +10°C to + 32°CN +16°C to + 32°CST +16°C to + 38°CT +16°C to + 43°CLocationThe appliance should be installed well away fromsources of heat such as radiators, boilers, directsunlight etc. Ensure that air can circulate freelyaround the back of the cabinet. To ensure bestperformance, if the appliance is positioned be-low an overhanging wall unit, the minimum dis-tance between the top of the cabinet and thewall unit must be at least 100 mm . Ideally, how-ever, the appliance should not be positioned be-low overhanging wall units. Accurate levelling isensured by one or more adjustable feet at thebase of the cabinet.WARNING!It must be possible to disconnect the appliancefrom the mains power supply; the plug must therefore be easily accessible after installation.Electrical connectionBefore plugging in, ensure that the voltage and frequency shown on the rating plate cor-respond to your domestic power supply.The appliance must be earthed. The power supply cable plug is provided with a contactfor this purpose. If the domestic power supply socket is not earthed, connect the appli-ance to a separate earth in compliance with current regulations, consulting a qualifiedelectrician.The manufacturer declines all responsibility if the above safety precautions are not ob-served.This appliance complies with the E.E.C. Directives.A Bmm mmmin1002036 Installation