2. Make sure that the power plug is not squashed or damaged by the back of theappliance. A squashed or damaged power plug may overheat and cause a fire.3. Make sure that you can come to the mains plug of the appliance.4. Do not pull the mains cable.5. If the power plug socket is loose, do not insert the power plug. There is a risk ofelectric shock or fire.6. You must not operate the appliance without the lamp cover5) of interior lighting.• This appliance is heavy. Care should be taken when moving it.• Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.• Avoid prolonged exposure of the appliance to direct sunlight.• Bulb lamps6) used in this appliance are special purpose lamps selected for householdappliances use only. They are not suitable for household room illumination.Daily Use• Do not put hot pot on the plastic parts in the appliance.• Do not store flammable gas and liquid in the appliance, because they may explode.• Do not place food products directly against the air outlet on the rear wall.7)• Frozen food must not be re-frozen once it has been thawed out.• Store pre-packed frozen food in accordance with the frozen food manufacturer's in-structions.• Appliance's manufacturers storage recommendations should be strictly adhered to. Re-fer to relevant instructions.• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pres-sure on the container, which may cause it to explode, resulting in damage to the appli-ance.• Ice lollies can cause frost burns if consumed straight from the appliance.Care and cleaning• Before maintenance, switch off the appliance and disconnect the mains plug from themains socket.• Do not clean the appliance with metal objects.• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.• Regularly examine the drain in the refrigerator for defrosted water. If necessary, cleanthe drain. If the drain is blocked, water will collect in the bottom of the appliance.InstallationFor electrical connection carefully follow the instructions given in specific paragraphs.• Unpack the appliance and check if there are damages on it. Do not connect the appli-ance if it is damaged. Report possible damages immediately to the place you boughtit. In that case retain packing.• It is advisable to wait at least four hours before connecting the appliance to allow theoil to flow back in the compressor.5) If the lamp cover is foreseen6) If the lamp is foreseen7) If the appliance is Frost Free24 Safety information