1 This row of individual lamps is divided in two sections: Program menu and Optionsmenu.Washing programmes: during the progress of the programme these little bars indicatethe phase of the washing programme: prewash - main wash - rinses - drying.2 In this row several details are displayed:– Setting mode guide to the selection of the washing programme - duration time ofthe programme, options (when together with the washing programme one or moreoptions are set, the update of the programme duration will occur automatically).– Once the programme has started indicates the sequence of the running phaseand the running time of the programme in progress.3 Symbols: indicate the options (see chart).The symbols have the following meaning:DELAY START: fixed in setting mode; flashing when countdown in progressCARE PLUS: illuminated when 70° INTENSIVE programme is setMULTITAB: illuminated when the MULTITAB function is active.SOUND VOLUME: exclusion of the acoustic signals.OPTION buttonPress this button to enter a menu of options; press again to exit from the menu.How to set the options1. Press OPTION button.2. Press one of the up and down scrolling buttons until desired option is displayed:DELAY STARTMULTITABSETTINGS3. Press OK / START to confirm and enter submenu.4. Press up and down scrolling buttons until required submenu is displayed.5. Press OK / START to confirm.6. To exit from the menu press OPTION button.Option menu Option submenuDELAY START Allows the start of the selected washing programme to be delayed forbetween 1 and 19 hours. The countdown will decrease with steps of 1hour. Only in the last hour the decrease is in minutes. Once the count-down has elapsed the washing programme will start automatically.MULTITAB Sets the dishwasher for the use of conventional detergents or combidetergent tablets (3 in 1 - 4 in 1 - 5 in 1 etc...). See MULTITAB function.– ON function activated. Use combi detergent tablets. The symbolappears in the display.– OFF function deactivated. Use conventional detergents.SETTINGS LANGUAGEAllows you to view messages in the required language.Control panel 7