An acoustic signal sounds when theappliance is at the set temperature.The fast heat up functiondoes not deactivate after theacoustic signal. You mustdeactivate the functionmanually.3. Set an oven function.5.5 DisplayA B CDEFGA. TimerB. Heat-up and residual heat indicatorC. Water drawer (selected models only)D. Core temperature sensor (selectedmodels only)E. Door lock (selected models only)F. Hours / minutesG. Clock functions5.6 ButtonsButton Function DescriptionCLOCK To set a clock function.MINUS To set the time.MINUTE MINDER To set the MINUTE MINDER. Hold thebutton for more than 3 seconds to acti-vate or deactivate the oven lamp.PLUS To set the time.TEMPERATURE To check the oven temperature or thetemperature of the core temperature sen-sor (if applicable). Use only while an ovenfunction is in operation.5.7 Heat-up indicatorWhen you activate an oven function, thebars in the display come on one byone. The bars show that the oventemperature increases or decreases.6. CLOCK FUNCTIONS6.1 Clock functions tableClock function ApplicationTIME OF DAY To show or change the time of day. You can change thetime of day only when the appliance is off.www.aeg.com10