AEG BE531400KM User Manual

Also see for BE1300300: User manual

AEG BE531400KM User Manual Manual pdf 28 page image

9. Clean the glass panel with water andsoap. Dry the glass panel carefully.When the cleaning is completed, installthe glass panels and the door. Do theabove steps in the opposite sequence.Install the smaller panel first, then thelarger.10.5 Replacing the lampPut a cloth on the bottom of the interiorof the appliance. It prevents damage tothe lamp glass cover and the cavity.WARNING!Danger of electrocution!Disconnect the fuse beforeyou replace the lamp.The lamp and the lamp glasscover can be hot.1. Deactivate the appliance.2. Remove the fuses from the fuse boxor deactivate the circuit breaker.The top lamp1. Turn the lamp glass covercounterclockwise to remove it.2. Clean the glass cover.3. Replace the lamp with a suitable 300°C heat-resistant lamp.4. Install the glass cover.The side lamp1. Remove the left shelf support to getaccess to the lamp.2. Use a narrow, blunt object (e.g. ateaspoon) to remove the glass cover.3. Clean the glass cover.4. Replace the lamp with a suitable 300°C heat-resistant lamp.5. Install the glass cover.6. Install the left shelf support.11. TROUBLESHOOTINGWARNING!Refer to Safety chapters.11.1 What to do if...Problem Possible cause RemedyYou cannot activate or oper-ate the oven.The oven is not connectedto an electrical supply or it isconnected incorrectly.Check if the oven is correctlyconnected to the electricalsupply (refer to the connec-tion diagram if available).The oven does not heat up. The oven is deactivated. Activate the oven.The oven does not heat up. The clock is not set. Set the clock.www.aeg.com28