AEG BE5303071 User Manual

AEG BE5303071 User Manual Manual pdf 25 page image

10. CARE AND CLEANINGWARNING!Refer to the Safety chapters.Notes on cleaning:• Clean the front of the appliance with asoft cloth with warm water and acleaning agent.• To clean metal surfaces, use a usualcleaning agent.• Clean the appliance interior after eachuse. Then you can remove dirt moreeasily and it does not burn on.• Clean stubborn dirt with a specialoven cleaner.• Clean all accessories after each useand let them dry. Use a soft cloth withwarm water and a cleaning agent.• If you have nonstick accessories, donot clean them using aggressiveagents, sharp-edged objects or a dish-washer. It can cause damage to thenonstick coating.10.1 LampWARNING!There is a risk of electrical shock.The lamp and the lamp glasscover can be hot.Before you change the lamp:• Deactivate the appliance.• Remove the fuses from the fuse box ordeactivate the circuit breaker.CAUTION!Put a cloth on the bottom of theinterior of the appliance. It pre-vents damage to the lamp glasscover and the cavity.Always use the same lamp type.Replacing the lamp at the cavityceiling:1. Turn the lamp glass cover counter-clockwise to remove it.2. Clean the glass cover.3. Replace the lamp with a suitable 300°C heat-resistant lamp.4. Install the glass cover.10.2 Oven ceilingYou can fold down the heating elementon the oven ceiling to clean the ovenceiling easily.WARNING!Deactivate the appliance beforeyou fold down the heating ele-ment. Make sure that the appli-ance is cold. There is a risk ofburns.Folding down the heating element1. Remove the shelf supports.2. Hold the heating element with twohands at the front.3. Pull it forwards against the springpressure and out along the supportson the two sides.4. The heating element folds down.You can clean the oven ceiling.Installing the heating element1. Install the heating element in theopposite sequence.Install the heating element cor-rectly above the supports on theinner walls of the appliance.2. Install the shelf supports.ENGLISH 25